Adirondack Counter Height Side Table

By Jaime Costiglio

This Adirondack style side table completes your outdoor seating area by providing a flat functional surface area. The side table coordinates with the Adirondack counter height chair and makes the perfect outdoor seating area.

Difficulty advanced

Tools

Kreg Tools

Kreg® Pocket-Hole Jig 720

Shop Now

Other Tools

Jigsaw
Miter Saw
Tape Measure
Drill (cordless)
Nail Gun
Sander

Materials

Wood Products

1 Board , 1x3 , 96"
2 Board , 1x4 , 96"
2 Board , 2x2 , 72"

Hardware & Supplies

24 1 1/4" pocket hole screws
12 1 1/4" finish nails

See All Tools & Materials

Cut List & Parts

4 Legs , 2 x 2 @ 35 1/4"
4 Short side aprons , 1 x 3 @ 9 1/2"
4 Long side aprons , 1 x 3 @ 14"
2 Table top middle , 1 x 4 @ 22"
2 Table top sides , 1 x 3 @ 21"
2 Table top outer edge , 1 x 3 @ 20"
4 Bottom shelf slats , 1 x 4 @ 12 1/2"

See Full Cut List & Parts

Directions

Dimensions

22"diameter top x 36"h
Step 1

STEP 1: Attach short side aprons to legs using wood glue and 1 ¼” pocket hole screws. Keep apron inset 3/8”. Make 2 sets.
Step 2

STEP 2: Attach long side aprons to short side panels at legs using wood glue and 1 ¼” pocket hole screws.
Step 3

STEP 3: Attach table top pieces to aprons using wood glue and 1 ¼” pocket hole screws. Keep 1/8” spacing between boards. Use a jig saw to trim boards to 22” diameter circle.
Step 4

STEP 4: Attach bottom shelf slats to aprons using wood glue and 1 ¼” finish nails. Notch out corners using jigsaw to fit around legs.