Cut List & Parts
- 1 Top of stool , 1 x 6 x 16
- 2 Legs , 1 x 6 x 8
- 3 Braces , Varies
Cut scrap wood for the top of the stool to desired width. I made mine 16" wide and used two pieces of leftover tongue and groove wood.
Cut wood for legs
Cut two pieces of 1" x 8" to eight inches. Bevel cut the edges to eight degrees. Drill four pocket holes into one end of each leg piece. Attach legs with pocket screws.
Bevel cut three of 1" x 2" to lengths necessary for braces between the legs for strength. Attach with brad nails or pocket screws.
Paint or stain!