Build these comfy Modern Outdoor Chairs using only 2×4’s. This chair sits a little low to the ground making it extremely comfortable to kick your feet out and relax around a fire or enjoy an evening with friends!
Tools
Kreg Tools
Other Tools
-
Miter Saw
-
Square
-
Table Saw
-
Drill (cordless)
-
Impact Driver
-
Sander
Materials
Wood Products
- 4 Redwood Board , 2x4 , 144"
Hardware & Supplies
- 2 Boxes Kreg HD Screws (125 ct)
- 1 Box 2 1/2" Outdoor Wood Screws
Directions
-
Build Arms (2)
Cut the boards for the arms according to the image. Drill Kreg HD Pocket Holes and assemble the pieces as shown using Kreg HD Screws.
-
Attach Back Supports
Attach the back supports to the two arms as shown in the diagram using Kreg HD Pocket Holes and Kreg HD Pocket Hole Screws.
-
Attach the Seat Facing
Attach the seat facing to the arms as shown using Kreg HD Pocket Holes and Kreg HD Screws.
-
Cut and Attach Side Rails
In order to get the two side rail supports (1 1/2" x 1 3/4" x 22 3/4") use a table saw to rip a 2x4 cut to 22 3/4" in half. Attach as shown using 2 1/2" outdoor wood screws.
-
Attach Seat Supports
Attach the seat supports to the side rails using 2 1/2" wood screws as shown.
