Step by step instructions on how to build a simple, fun puck shot carnival game.
Difficulty
easy
Tools
Kreg Tools
Other Tools
-
Clamps
-
Nail Gun
Materials
Wood Products
- 2 Board , 1x4 , 96"
- 1 Board , 1x3 , 24"
- 1 Plywood , 1/2" Thick , Quarter Sheet
Hardware & Supplies
- 1 Spray paint
- 1 Spray sealer
- 1 Wood glue
Cut List & Parts
- 2 Side frame , 1x4 x 48"
- 1 Goal , 1x3 - 24"
- 1 Back frame , 1x4 - 25.5"
Directions
-
Attach the side frame
Attach the side frames to the plywood base with wood glue and 1 1/4" Brad nails.
-
Attach the puck goal
Attach the puck goal 4" from the edge of the plywood base with wood glue and 1 1/4" Brad nails.
-
Attach the back frame
Attach the back frame to the plywood base and frame sides with wood glue and 1 1/4" Brad nails.
-
Prep the surface for painting
Sand all the boards and the surface of the plywood. Take your time and cycle through 80, 100, 150, 220 grits of sand paper. (Avoid using some of the lower grits of sandpaper on the plywood. For the plywood, start with 150 grit.)
-
Paint and Seal
Paint the boards to your heart’s content and seal the surface with your favorite top coat. Check out the link in the "Extras" tab for more photos and happy building!
