The New Home of BuildSomething

You'll find almost a thousand step–by–step plans plus how–to articles and videos to help you build, along with ingenious tools for every building task

We're glad you're here, and we're ready to help you build something with kreg!

Build Something
With
bathroom-shelf-02
bathroom-shelf-vertical
bathroom-shelf-2

Featuring two deep cubbies and three hooks for hanging, this pretty storage shelf is perfect for your bathroom. Store hand towels, toilet paper, and other bath accessories in the cubbies or hide them away in wicker baskets. The faucet shaped hooks add a whimsical touch to the whole project.

Difficulty easy

Tools

Kreg Tools

Other Tools

  • Circular Saw (cordless)
    Circular Saw (cordless)
  • Jigsaw
    Jigsaw
  • Square
    Square
  • Tape Measure
    Tape Measure
  • Drill (cordless)
    Drill (cordless)
  • Sander
    Sander

Materials

Wood Products

  • 2 Board , 1x12 , 72"
  • 1 Board , 1x6 , 24"
  • 1 Board , 1x2 , 24"

Hardware & Supplies

  • 1 1-1/4" Pocket Hole Screws
  • 3 Robe Hooks
  • 1 1-1/4" Wood Screws

Cut List & Parts

  • 2 Sides , 3/4" x 11-1/4" x 16-3/4"
  • 1 Back , 3/4" x 5-1/2" x 21-1/2"
  • 1 Back , 3/4" x 11-1/4" x 21-1/2"
  • 2 Shelf and Top , 3/4" x 11-1/4" x 20"
  • 1 Divider , 3/4" x 11-1/4" x 8-1/4"
  • 1 Top , 3/4" x 11-1/4" x 22-1/2"
  • 1 Top Trim , 3/4" x 1-1/2" x 22-1/2"

Directions

  • Cut the Sides

    Using a jigsaw, cut the two sides as shown and drill 3/4" posterior-facing pocket holes.

  • Attach the Back

    Attach the back to the sides with 1-1/4" pocket hole screws. You may opt to drill 3/4" pocket holes into the 1x6 and 1x12 back boards and join them together with 1-1/4" pocket hole screws before attaching the sides.

  • Attach the Bottom

    Drill 3/4" pocket holes into the bottom board and attach it to the carcass with 1-1/4" pocket hole screws.

  • Attach the Divider

    Drill 3/4" pocket holes into the divider and attach it to the shelf with 1-1/4" pocket hole screws.

  • Attach the Top

    Drill 3/4" pocket holes into the top and attach it to the shelf with 1-1/4" pocket hole screws.

  • Construct and attach the top

    Drill 3/4" pocket holes into the 1x12 board and attach the 1x2 board with 1-1/4" pocket hole screws. Pre-drill and countersink pilot holes into the top and attach it to the shelf with 1-1/4" wood screws.

  • Attach Robe Hooks

    Attach robe hooks as shown. Fill pocket holes with wood filler or pocket hole plugs, sand, and finish as desired. To hang the shelf on the wall, drive 2-1/2" wood screws from the inside the shelf into the wall studs.

  • Visit JenWoodhouse.com

    For more free building plans and DIY project ideas, visit www.JenWoodhouse.com