Circular Saw (corded)
- 4 Board , 2x4 , 96"
- 2 Board , 4x4 , 96"
- 1 Plywood , 3/4" Thick , Full Sheet
Hardware & Supplies
- 80 3" Screws
- 12 1 5/8" screws
- 4 3" Locking Casters
Take two pieces of plywood 48"x24"x3/4" and glued them together.
Cut 4 - 4x4 to 29 1/2"
4 - 2x4x47
4 - 2x4x20
Creat two Apron frames
The legs and aprons are put together with glue and screws
Cut the base deck to fit on the bottom aprons
slide the base deck in from the side at and angle, then rotate into place.
Place Casters on each corner
Set table top in place centered on the frame. Predrill and countersink the screws into the frame.