This farmhouse dining table is made with just seven 5/4″ thick, wide planks and chunky turned legs for an authentic, farmhouse look. These plans can be customized to make a custom-sized table that is just right for your dining needs.
Tools
Kreg Tools
Other Tools
-
Miter Saw
-
Square
-
Tape Measure
Materials
Wood Products
- 5 Board , 5/4" x 8" , 96"
- 2 Board , 5/4" x 6" , 96"
Hardware & Supplies
- 50 2-1/2" pocket screws
- 1 Wood glue
Directions
-
Cut wood
Cut the end and side apron pieces.
-
Route apron pieces (optional)
Cut a groove into apron pieces 2" from the edge with a router
-
Drill pocket holes
Use Kreg Jig to drill pocket holes at both ends of each apron piece.
-
Drill pocket holes
Drill pocket holes on the long edges of aprons. These will be for attaching the table top.
-
Assemble table frame
Using 2-1/2" pocket screws and wood glue, assemble the table frame.
-
Assemble table top
Use wood glue and pocket screws to make table top with the five 8" wide planks.
-
Sand and attach table top
Use a belt sander or orbital sander to smooth table top. Attach table top to table from with wood glue and pocket screws.
-
Finish!
Paint or stain table as desired!
