After a long day of hard work, you want a place to retreat that you can be proud of. Well, work on one more project before you rest and build this modern DIY four poster canopy bed that looks great and will transform the feel of your bedroom.
Tools
Kreg Tools
Other Tools
-
Table saw
-
Miter saw
-
Cordless drill
-
Orbital sander
-
Measuring tape
Materials
Wood Products
- 16 Hardwood boards , 3/4" x 3 1/2" x 8'
- 15 Hardwood boards , 3/4" x 5 1/2" x 8'
- 13 Pine boards , 3/4" x 3 1/2" x 8'
- 4 2x4 Boards , 1 1/2" x 3 1/2" x 8'
Hardware & Supplies
- 1 Box of 1 1/4" pocket hole screws (See tools list)
- 1 Box of 2 1/2" pocket hole screws (See tools list)
- 1 Wood glue
- 1 Wood stain of choice
Directions
-
Glue posts together
Start by gluing all your Posts together in groups of three.
Start by coating one side of a Post board with wood glue and then place a second board on top of it.
Coat the top side of the second Post board with wood glue and then place the third Post board on top of that.
Clamp together and let dry.
Repeat to create three more Posts.
-
Glue sides together
Start by gluing all your Side Rails together in groups of two.
Start by coating one side of a Side Rail board with wood glue and then place a second Side Rail board on top of it.
Clamp together and let dry.
Repeat to create one more Side Rail.
-
Glue front/back rails
Start by gluing all your Front/Back/Footboard Rails together in groups of two.
Start by coating one side of a Rail board with wood glue and then place a second Rail board on top of it.
Clamp together and let dry.
Repeat to create two more Front/Back/Footboard Rails.
-
Create headboard
Drill two pocket holes on each end of the Back Rails.
Drill two pocket hole screws on each end of each Headboard piece and three holes along one long side of each.
Using pocket hole screws, attach the Back Rail between two Posts, aligned flush with the front of the Posts and 6" from the bottom.
Starting above the Back Rail, attach a Headboard between the two back Posts, flush with the front edge.
Repeat for the remaining four Headboards.
-
Create footboard
Drill two pocket holes on each end of the Front and Footboard Rails.
Using pocket hole screws, attach the Front Rail between the other two Posts, aligned flush with the back of the Posts and 6" from the bottom.
Using pocket hole screws, attach the Footboard Rail directly above the Front Rail.
-
Attach side rails
Drill two pocket holes on each end of the Side Rails.
Using pocket hole screws, attach one Side Rail between a front and back Post, 6" from the bottom, 1 1/4" from the inside of the Posts and 3/4" from the outside of the Posts.
Repeat on the other side.
-
Attach upper beams
Drill two pocket holes in each end of the Upper Side Beams and Upper Front/Back Beams.
Using pocket hole screws, attach the Upper Front/Back Beams between their respective posts, 1" down from the top.
Using pocket hole screws, attach the Upper Side Beams between their respective posts, 1" down from the top.
-
Attach supports/legs
Using wood glue and screws, attach the Side Inner Supports to the Side Rails 1" down from the top.
Using wood glue and screws, attach the Front/Back Inner Supports to the Front/Back Rails 1"down from the top.
Drill two pocket holes in one end of each Leg and both ends of each Center Support.
Using pocket hole screws and wood glue, attach three Legs evenly spaced across one of the Center Supports. Repeat for the other.
Using pocket hole screws, attach the Center Supports evenly spaced between the Front/Back Inner Supports.
-
Attach Slats
Starting flush along the Back Rail, use screws to attach a Slat to the Side Inner Supports.
Use the Kreg Quick Flip to drill a pilot hole in each spot before driving a screw into place.
Using a 3 1/2" spacer, continue until all Slats are in place.
-
Add mattress
Slide the mattress into place on top of the Slats and between the Rails.
Get a great night sleep!
-
Enjoy!
Enjoy your handiwork and tag @CharlestonCrafted on Instagram with a picture!