Meet The Kreg Corner Routing Guide Set

Introducing the Kreg Corner Routing Guide Set…

The easy route to decorative corners and edges on your projects.  This jig allows you to add decorative corner profiles to your projects faster and easier than ever before. In this article, we’ll show you some of the key features of this Corner Routing Guide Set and how it works.

The set includes a baseplate with handle and edge-stop posts, and 8 quick-change corner profile templates.

RADIUS:
– ¼”, ½”, 1”, 1-½”, 2”
CHAMFER:
– ½”, 1”, 2”

The underside of the baseplate features Kreg’s high-friction GripMaxx  coating to keep it securely on the workpiece while in use.

The included radius and chamfer templates quickly and easily lock into the baseplate for maximum results with minimal effort.

Simply choose the corner profile you want for your project, and attach it to the baseplate. No tools required!

The built-in edge stop posts are perfectly oriented at 90 degrees. Just place the jig on your workpiece with all four posts contacting the edge. When using a large handheld router, simply clamp it down to the workpiece for a flawless corner profile in record time.

Works beautifully with Kreg’s Double Bearing Flush Trim Bit on handheld and trim routers.

Threaded edge-stop posts adjust for a variety of material widths in seconds. Only have a trim router? No problem! The incorporated handle allows you to hold the jig tight to the material while operating the router with your other hand.

Not just for handheld routers! Simply place the jig on the workpiece as usual and route perfect corner profiles on your router table.

Mounts to the wall for quick and easy access.